Switch Settings; Cleaning And Care - SOLIS 379 Gebrauchsanleitung

Warning! Operator and appli-
ance protection!
Please inform yourself about the local
supply voltage! The supply voltage
must match the set voltage (V) speci-
fied on the device.
• Set the voltage selector switch f to the
local supply voltage whilst the mains
plug is disconnected.
Switch position
Malfunctions!
If the supply voltage is 110 V and the
appliance setting is 230 V, malfunc-
tions will occur - the appliance will not
operate at full power.
Overload!
If the supply voltage is 230 V and the
appliance setting is 110 V, malfunc-
tions will occur - the appliance will
operate at too high a speed, over-
heat and may be destroyed. Risk
of burns! Pull out the mains plug
immediately, reset the 2-step slid-
ing switch to «0» and let the appliance
cool down for approx. 5 min.
Set the appliance to 230 V, reconnect
it to the power supply and switch
on again. If the appliance cannot be
switched on again or does not produce
warm air, the appliance is no longer
operative.
Drying hair
Your appliance is fitted with a 2-step tem-
perature and air volume sliding switch c. To
switch on and regulate the temperature and
air volume activate switch c. For precision
hair styling fit concentrator nozzle a onto
the air outlet opening.
Solis_CompactDryer-Betriebsanleitung.indd 17
Voltage
Appliance is set for
a supply voltage of
230 V.
Appliance is set for
a supply voltage of
110 V.
Temperature and air
volume sliding switch
With the 2-step temperature and air volume
sliding switch c you can switch the appli-
ance on and select the desired temperature
with the according air volume.
– = full power
– = mean power
= appliance is switched off

Switch settings

–
large air volume
1,600 watt power (230V)
1,100 watt power (110V)
–
low air volume
550 watt power (230V)
500 watt power (110V)
–
Off

Cleaning and care

• Danger of electric
shock!
Switch off the unit
before it is to be cleaned
and pull out the plug.
• Danger of burns!
It is essential to let
the unit completely
cool down.
• Before cleaning, disconnect the appli-
ance from the mains.
• Never immerse the appliance in water.
• Protect your appliance! Do not use sharp
or abrasive cleaning agent.
E
17
26.06.14 16:20