Klarstein 10003440 Bedienungsanleitung Seite 12

Installation diagram of fixed and sliding shelves:
WALL
GUIDE
Fitting the rear part of the guide
GUIDE
WALL
GUIDE
WALL
Fitting the front part of the guide
GUIDE
WALL
Then refit the sliding shelf as shown below:
GUIDE
SLIDING SHELF
Your cabinet was designed to store a maximum number of bottles in total security, we
recommend that you observe the tips below to ensure optimize loading.
A) Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated in one
point; also make sure your bottles do not touch the back of the cabinet, or the step at bottom.
B) Also make sure that bottles are not all grouped together at the top or bottom of the cabinet.
C) Observe the loading instructions provided in section 6, according to the type of storage fixtures with
which your cabinet is equipped, and never stack bottles on a sliding shelf.