Conrad Electronic 57 43 70 Bedienungsanleitung Seite 22

• In commercial institutions, the accident prevention regulations
of the Employer's Liability Insurance Association for Electrical
Systems and Operating Materials are to be observed.
• The product is suited for outdoor use (IP44).
• Maintenance, adjustment and repairs may only be carried out
by a qualified specialist or a specialised repair shop.
• For any questions not treated in these operating instructions,
please contact our customer service or other specialists.
• The solar module generates power as soon as it is exposed to
light. While a single module is below the so-called low-voltage
limit, several modules connected in series (voltage summation)
or in parallel (current summation) pose a risk. The fully insulat-
ed connection box provides protection against accidental con-
tact. Nevertheless, pay attention to the following information on
the prevention of an electric shock, sparking, and fire:
- Never install solar modules or the used cables with damp or
- Never touch the connecting cables or the connecting termi-
• Make sure that no mechanical forces affect the solar module.
Solar modules will be damaged if bent, stacked, stepped on,
dropped (even from a low height) or exposed to load.
• When installing and connecting the device, observe the
applicable on-site rules, accident prevention regulations and
building regulations.
• Only a person familiar with the specifications (VDE) and the
dangers involved should install this product.
• The product is suitable for use on a vertical wall.
• When the product is taken from a cold to a warm room (e.g.
during transport), condensation may be produced. This pos-
es the risk of a deadly electric shock! Wait until the compo-
nents have reached room temperature before installation and
operation.
• In schools, educational centres, hobby and self-help work-
shops, the operation of the product is to be supervised by
trained employees.
22
wet plugs or sockets.
nals with moist or wet hands.