Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use
The baby warmer is meant to pre-heat the cradle/crib/cot of a baby. There are some safety
measures for when the baby warmer is used while the baby is in the cradle/crib/cot (see step 3)
STEP 1 | CONNECTING
•
Open the safety cover of the connector (2) on the baby warmer.
•
Press the charger (1) into the connector (2).
•
Press the plug of the charger into the power socket. The red indicator light will
turn; the baby warmer is charging now.
•
When the baby warmer is used for the first time, it can emit an unpleasant smell.
This is caused by the reaction of the insulating material to heat.
STEP 2 | CHARGING
•
The baby warmer has a thermostat which automatically turns off the device when
the thermostat reaches a temperature of 65 °C (149°F). The red indicator light
turns off and the baby warmer is warmed up. The charging time is approximately
6 minutes.
•
After it has finished charging, disconnect the plug from the power socket and
disconnect the charger from the baby warmer.
•
The baby warmer can also be charged to a lower temperature. To do this, simply
maintain a shorter charging time by removing the plug from the power socket
before the red indicator light turns of.
•
Finally put the baby warmer in the cover and seal the cover with the Velcro strap.
•
The baby warmer is now ready to be used.
STEP 3 | USAGE
•
Place the baby warmer on the mattress next to the baby. Always maintain a
minimum distance of a hand width between the baby and the baby warmer.
•
When there is not enough space next to the baby, place the baby warmer next
to the feet with a minimum distance of a hand width or place the baby warmer
between the blankets but closer to the baby.
•
When the baby's temperature is too low, then on instruction of the obstetrician
the baby warmer is placed against the baby. The baby warmer with cover is then
always wrapped in a cloth or towel.
STEP 4 | RECHARGING
•
After 3 hours (under the blankets), the baby warmer is cooled down to a
temperature of approximately 45°C (113°F).
•
As soon as the baby warmer is cooled down to a temperature below 40°C (104°F),
the baby warmer can be recharged again.
•
To recharge the baby warmer, simply connect it again to the power socket (see step 2).
11
Werbung
Inhaltsverzeichnis
