Frequently Asked Questions; No Connection; No Signal Available From Chosen Source; Video Resolution Is Not Supported - PureLink WHD100T/R Benutzerhandbuch

Mode Status description
Low power consumption,
Standby
all functions are off.
System is sarting up, this takes
Starting up
about 80 seconds.
If the system is not able to make a
connection for 80 seconds during

No connection

start-up, it continues to search for
available channels.
No input signal available from
chosen source.
Connected

Video resolution is not supported.

Video resolution is recognised
and connection between transmit-
ter and receiver is stable.

8. FREQUENTLY ASKED QUESTIONS

NO CONNECTION
If the PureLink WHD030-V2 is not able to make a stable connection for 80 seconds during start-up, the PureLink
WHD030-V2 Receiver is probably outside the range of the PureLink WHD030-V2 Transmitter. Place them closer to each
other (a minimum distance of 1 meters apart) and check whether the connection can be made.

NO SIGNAL AVAILABLE FROM CHOSEN SOURCE

The PureLink WHD030-V2 does not recognize an input signal on the selected SOURCE.
• Check whether the correct HDMI source has been selected and whether this is ON.
• Check whether the HDMI cable between the PureLink WHD030-V2 Transmitter and HD device is connected properly.
• Replace the HDMI cable to the HD device.
VIDEO RESOLUTION IS NOT SUPPORTED
The video resolution that is set on your HD device is not recognized by the PureLink WHD030-V2 Transmitter.
• Connect the HD device directly to the HDTV or projector and check whether the set video resolution corresponds to
the resolutions that are supported.

LAPTOP OR PC SETTINGS

• Consult your Laptop or PC instructions for the correct picture and audio settings.
• Check to ensure that the resolution set corresponds to the resolutions that are supported.
Do you have other questions that have not been resolved by the above information?
Please contact us on www.purelink.de/en/service/support/
- 7 -
Power LED Status LED
receiver receiver
Red Off
Flashes blue Flashes
Flashes blue Flashes
Blue Flashes 3x per second
Blue Flashes 1x per second
Blue Blue
Display on
HDTV / projector
Audio and video will be
reproduced on your HDTV /
projector
ENGLISH