Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Start-Up and Operation

Cleaning

Clean the metal plates (4) from time to time with a cloth or
similar. Be sure to remove the 1 A micro fuse in the power cable
before touching the device. The remaining high voltage will drain
from the unit within 60 seconds.

General Notes

When your car already has been visited by martens, most likely
the animals have left their marks for the identification of their
area. These odours must unconditionally be removed before
installing the marten shock. Or other martens could even enter a
bite protected engine compartment. To prevent this, washing the
motor thoroughly is suggested. Furthermore, the animals leave
their marks frequently under the vehicle, e.g. on the car park.
Therefore it is recommendable to remove these traces with
detergents and mop. This way there is no reason for the marten
to be forced to defend its area.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis