Herunterladen Inhalt Inhalt Diese Seite drucken

AEG DI7490-M Gebrauchsanleitung Seite 5

Vorschau ausblenden Andere Handbücher für DI7490-M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
CONTROLS
BUTTON DISPLAY
A
Displays the set speed
B
Displays the set speed
C
Displays the set speed
D
Displays HI The spot
flashes
E
Displays the time
remaining before the hood
turns off (countdown) and
the Set speed. The spot at
the bottom right flashes
F
Displays F
Displays C
FUNCTIONS
Turns the suction motor on and off
Decreases the speed of the motor V3 V2 V1
Increases the speed of the motor V1 V2 V3
Starts maximum suction speed. After 5 minutes
the speed will return automatically to the one
set before. This function can be deactivated by
pressing the button again (the decimal point at the
centre of the display will flash).
Enables automatic delayed shutdown of the
appliance (Delay), with a delay that depends on
the working speed set.
Speed 1 delay 20 minutes
Speed 2 delay 15 minutes
Speed 3 delay 10 minutes
The proposed delay time can be changed by
pressing the button successively and selecting
one of the options available (5, 10, 15, 20, 25 and
30 minutes). At the end of the time selected the
appliance will turn off automatically. To deactivate
this function, simply press the button until the
option selected is 0 or turn the motor off.
Turns the hob lighting system on and off
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours. This indication is
only visible when the motor is turned off. To reset
the alarm:
Turn the motor off and press button D for
approximately 3 seconds, until the display turns off.
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters.
The alarm is triggered after the Hood has been
in operation for 200 working hours. This indication
is only visible when the motor is turned off. This
indication must be activated following the procedure
described in the section on maintenance of the
activated charcoal filter. To reset the alarm:
Turn the motor off and press button D for
approximately 3 seconds, until the display turns off.
ENGLISH
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis