Maintaining And Cleaning The Mains Rectifier - Waeco CoolPower EPS100 Montage- Und Bedienungsanleitung

Maintaining and cleaning the mains rectifier

➤ Determine the required cross section of the cable in relation to the cable
length according to fig. 3, page 3.
Key for fig. 3, page 3
Co-ordinate axis
l
∅
➤ Connect the battery using the B+ and B– terminals on the front plate
(fig. 4, page 4).
➤ Connect the BD35F compressor
– using the C+ and C– terminals (fig. 5 1, page 4) or
– using the socket on the front plate (fig. 5 2, page 4).
8 Maintaining and cleaning the mains
rectifier
!
WARNING! Danger of electrocution!
Always disconnect the mains plug before you clean and service
the device.
A
NOTICE! Danger of damaging the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the device.
➤ Occasionally clean the device with a damp cloth.
20
Meaning
Cable length
Cable cross section
CoolPower EPS100
Unit
m
mm²
EN