Operation; Assembling The In-Ceiling Housing - Eneo EDC-IPS-2/24V Montageanleitung

4. Operation

This housing has controlled the heater and the fan by a thermostat. The thermostat of heater is set to turn it on from 4°C (±5°C) and to turn it off from 5°C
(±5°C). The thermostat of fan is set to turn it on from 40°C (±5°C) and to turn it off from 30°C (±5°C).

5. Assembling the In-Ceiling Housing

This mounting device enables the dome camera to be mounted to the suspended ceiling. The mounting clamps, which are affixed to the ceiling tile, attach
directly to the dome's mounting base for a quick and easy installation.
This mounting device enable to view horizontally and tint bubble hide dome camera.
Step 1
TURN
Step 3
Step 5
Step 6

Step 2
PUSH
Remove window
PUSH
Step 4
Ring should be installed
Dust cover ring
Step 7