Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting Place
The transmission range of the floodlight to other transmitter is approx.
70 m in free field without disturbances and direct visual contact. Please
keep in mind that the transmission range will be reduced by obstacles
such as walls made of concrete or other radio controlled devices. Do not
mount the floodlight close to metallic objects.
Before firmly mounting the floodlight, make sure the transmission signal
can be emitted. If interferences occur or there is no transmission, select
another place for the floodlight or the transmitter.
Mounting
Mount
the
vertically, as shown in the figure.
Mount the floodlight on a solid
surface, preferably 1.8 – 2.4 m
above the ground or under eaves
of the house.
Make
sure
voltage-free when connecting the
wiring!
1. Use suitable screws and
dowels for the appropriate
surface
to
floodlight.
2. Remove
the
bracket and fix the bracket
on the wall. Afterwards
reattach the floodlight to the mounting
bracket.
3. Tilt the floodlight forwards and unscrew the
rear cover (10). Connect the wiring with the
terminals as shown in the drawings on the
next pages.
Mounting and Operation
floodlight
only
power
mains
mount
the
mounting
is
12
Werbung
Inhaltsverzeichnis
