Listening To The Radio; Connection Of External Devices; Alarm Function - Clatronic BR 836 Bedienungsanleitung

Listening to the Radio

Scan Stations
1. Press the FUNCTION button (4) repeatedly until "RADIO"
appears on the display.
2. You have two options for tuning a station:
­ Press the / buttons (11).
­ Keep the / button pressed. The device scans to
the next and the previous radio station respectively.
NOTE:
If the reception is too weak, or if there is interference on
the station being received, try to improve the reception by
changing the position of the device.
Save Station
1. If you have found the desired station, push the PROG /
MEM button (13). The indicator "MEM" appears on the
display and the preset location (e. g. P 02) flashes.
2. For choosing the memory position, press / M+ (9) or
/ M – button (8).
3. Press the PROG / MEM button to save the settings.
Select a Preset Station
To select the preset radio stations, press the / M+ (9) or
/ M – button (8).

Connection of External Devices

AUX Jack
Connect analogue playback devices. When connecting to this
jack you may also listen to the audio of other devices, such
as MP3 or CD players etc., via the speakers.
1. Open the rubber cover.
2. Connect the external device to the AUX jack with a 3.5 mm
jack plug. If necessary, use a suitable adapter. (Adapter
not included.)
3. Now use FUNCTION button (5) to select AUX mode.
4. Via the speakers you will listen to the audio of the external
device; use / buttons (12) to adjust the
volume.
5. For further functions please refer to the user manual of
the external audio device.
Always keep the flap closed when not in use.
NOTE:
Set the volume of the external device to a proper audible
level.
USB Port
This device has been developed in line with the latest tech­
nical advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com­
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
12
BR836_IM_CTC_new2
storage devices. This is not a malfunction of the device. Only
use commercially available USB sticks.
1. Open the rubber cover.
2. Press the FUNCTION button (5) until the message "
appears on the display.
3. Directly connect a USB storage medium to the respective
port. Playback then begins. The elapsed playing time of
the current track is shown on the display.
NOTE:
Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
4. Operation:
• Skip to the next, previous title respectively with the
/ buttons (11). If you keep the buttons pressed
down, a music search will start.
• You can interrupt the replay with the / M – button (8).
The elapsed playing time is shown on the display. If
you push the button again, the replay will start in the
same location.
• Press the / M+ button (9) to stop play. The total
number of tracks is shown on the display.
Always keep the cover closed when not using it.
CAUTION:
Before you remove the USB memory medium, switch the
device to Radio operation.
NOTE:
• The USB operating voltage is only active in "USB mode".
• The 5 V required for USB mode cannot be guaranteed
when the battery is insufficiently charged. When the
battery charge is too low, the sound may drop out when
playing music via USB. If this is the case, charge the
battery or operate the unit via the mains adapter.
• The USB ports are not designed for charging external
devices.
• Please note: The USB ports are only intended for
playing music from USB sticks. It only provides a low
power (100 mA) power supply. Those USB ports are not
suitable for using external 2.5" hard drives with start­up
currents of up to 1100 mA.

Alarm Function

You have an option to set up to two alarms.
Setting the Alarm Time
1. Switch the device off.
2. When in standby, keep the
The message "AL1" and the hours will start flashing.
3. Make the adjustment with the
4. Press the button once again. The message "AL1" and
the minutes will flash.
5. You make the adjustment with the
"
button (6) pressed down.
/ buttons (11).
/ buttons.
24.05.17