Inhaltsverzeichnis
Werbung
Installation of the System
Please observe the room conditions such as the position of sockets etc. when choosing the place of instal-
lation. Please make sure that the system is not exposed to direct sunlight, vibrations, dust, heat, cold and
moisture. Keep the system away from strong transformers or engines.
Place the system onto a stable and horizontal surface. See to a sufficient air circulation
for the system in order to dissipate the generated heat. Never cover the ventilation aper-
tures. Non-observance of these instructions might involve damaging of the product. Only
operate the product if it is installed properly. Otherwise, the CD player might not work
properly.
Non-observance of the instructions might involve damaging of the inserted CD or of the
CD player.
Considering the variety of applied varnishes and polishes for furniture, the system bases
might leave visible residues on the furniture due to chemical reaction. So please do not
place the system onto furniture without suitable protection.
Do not drill additional holes into the device and do not use additional screws to attach
the system, because this damages the product.
Installation of the Speakers
Do not place the speakers near screens such as TV screens or computer monitors. The
magnetic fields of the speakers might distort the image.
A space-saving possibility for installation is to place the speakers directly at the right and the
left of the main unit.
You also can place the speakers at a certain distance of
the main unit. In this case, please observe the following
instructions to obtain a good sound.
Place the speakers so that the listener's place is at the same
distance to both speakers (equilateral triangle).
Place the speakers approximately in ear height. Try different
installation possibilities and alignments to find out the best
place of installation for your room.
UKW (VHF) Cable Antenna
To ensure an optimum UKW (VHF) reception for your system, please unwind the UKW (VHF) cable antenna
completely. Lay the cable antenna so as to obtain good reception of the radio stations in radio mode. Try to
find the best position possible.
Metallic objects such as ferro-concrete walls, vapor-plated mirrors or metal shelves etc. might
impair reception. No devices with strong electric fields such as mobile phones, walkie-talkies,
electric engines etc. should be placed near the system. This might also impair reception.
Connection
Make sure that the device is separated from the mains voltage before connection or
before any modification of connection. Pull the mains plug out of the mains socket.
26
REPEAT Function
1. Press once the REPEAT/PRESET UP key (10) while the CD is playing; the display indicates "REPEAT".
The track being played will be repeated until the REPEAT function is stopped.
2. Press twice the REPEAT/PRESET UP key (10) while the CD is playing; on the display the "REPEAT"
indication is flashing. After all tracks have been played, the whole CD will be repeated until the REPEAT
function is stopped.
3. Press again the REPEAT/PRESET key (10) to deactivate the REPEAT function.
AUX mode
1. Switch the device on by pressing the POWER key (1).
2. Press the AUX key (23); the display indicates "AUX" and the time.
3. Press the playing key of the connected device.
4. Use the VOL-/+ key (4) or the JOG VOLUME control (2) to set the volume.
Setting the Time and the Timer Function
After every setting process, the device automatically leaves the setting function after a short time if no
key is pressed. The set values then are stored.
Setting and Indicating the Time
1. Switch the device on by pressing the POWER key (1).
2. Press the CLOCK key (13); the display indicates "CLK".
3. Press the PROGRAM/MEMORY key (7), the hour indication starts flashing. As long as the hour indica-
tion is flashing, you can set the hours by means of the I
and hold one of the keys, the indication increments or decrements.
4. Press again the PROGRAM/MEMORY key (7); the minute indication starts flashing. As long as the
minute indication is flashing, you can set the minutes by means of the I
(11). If you press and hold one of the keys, the indication increments or decrements.
5. If no further keys are pressed, the device automatically leaves the setting mode; the set time is stored.
6. The time indication can be activated during operation by pressing once the CLOCK key (13). After a
short time, the devices switches back to the basic indication (e.g. radio).
In stand-by mode, the display indicates the time.
TIMER Function
1. Switch the device on by pressing the POWER key (1).
2. Press twice the CLOCK key (13); the display indicates "ON 0:00" and the "TIMER" indication is flashing.
3. Press the PROGRAM/MEMORY key (7)
;
the hour indication starts flashing. As long as the hour indica-
tion is flashing, you can set the hours by means of the I
and hold one of the keys, the indication increments or decrements.
4. Press again the
PROGRAM/MEMORY key (7)
; the minute indication starts flashing. As long as the minute
indication is flashing, you can set the minutes by means of the I
you press and hold one of the keys, the indication increments or decrements.
5. If no further keys are pressed, the device automatically leaves the setting mode; the set TIMER ON time
is stored.
TUNNING/SKIP keys
I (11). If you press
TUNNING/SKIP keys
I
TUNNING/SKIP keys
I (11). If you press
TUNNING/SKIP keys
I (11). If
31
Werbung
Kapitel
Inhaltsverzeichnis
