AEG ERD 165 C Benutzerinformation Seite 34

34 electrolux
Remove the freezer door, pulling it
downwards slightly.
Remove the refrigerator door,
pulling it upwards slightly.
· Remove the top cap of the freezer
door and refit it on the opposite
side.
· Remove the top cap of the
refrigerator door and refit it on the
opposite side.
Unscrew the top hinge pin (G) of
the refrigerator and screw it on the
opposite side.
D548/1
Using a tool remove the cover (e),
unscrew the bottom hinge pin (F)
and screw it on the opposite side.
· Refit the cover (e) on the opposite
side.
· Insert the middle hinge pin in the
left hole of the refrigerator door.
· Fit the refrigerator door on the
bottom hinge pin (f).
. Fit the freezer door on the top
hinge pin then, tilting the doors
slightly, insert the middle hinge pin
in the left hole of the freezer door.
. Open the doors and fix the middle
hinge on the left side with two
screws. Do not forget the plastic
spacer, inserted under the middle
G
hinge (H). Make sure the edge of
the doors is parallel with the edge
of the top.
. Remove the screws and remove
the handles. Refit the handles on
the special middle support of the
door and retighten the screws. Fit
the plastic caps (contained in the
instructions bag) in the free holes.