AEG Electrolux HK654070IB Benutzerinformation Seite 14

14 www.aeg.com
cable type: H05BB-F Tmax 90°C.
Speak to your local Service Centre.
8.4 Attaching the seal to the
rabbet
1. Clean the rabbets in the worktop.
2. Cut the supplied seal stripe into 4
stripes. The stripes must have the
same length as the rabbets.
3. Cut the ends of the stripes at an
angle of 45°. They should fit in the
corners of the rabbets accurately.
8.5 Assembly
min.
500mm
min.
50mm
min.
28 mm
4. Attach the stripes to the rabbets. Do
not extend the stripes. Do not bond
ends of stripes one over another.
After you assemble the hob, seal the
remaining gap between glass ceramic
and the worktop with silicone. Make sure
the silicone does not get under the glass
ceramic.
R10mm
R5mm
7mm
12mm
490 +1 mm 560 +1 mm
514 +1 mm
min.
20 mm
min. 55mm
584 +1 mm
min.
12 mm