Cleaning And Maintenance - Ideen Welt P8-RM-AP Bedienungsanleitung

Deflating
1. Position the on/off switch (3) at "0".
2. Insert the air pump plug (2) into a suitable socket which is easily accessible
at all times. Ensure that the power supply is correct.
3. Open the valve cap on the inflatable article. Fit a suitable valve adapter (5)
to the air inlet (1) and into the valve on the inflatable article. Ensure that the
valve is not blocked.
4. Position the on/off switch (3) at "I" to activate the air pump.
5. Switch the on/off switch (3) to "0" to deactivate the pump as soon as the
inflatable article has been completely deflated.
6. Remove the valve adapter (5) and close the valve on the inflatable article.
7. Pull the plug (2) out of the socket.

CLEANING AND MAINTENANCE

1. Make sure you have read the safety instructions before cleaning.
2. Use a slightly dampened cloth and, if necessary, a mild cleaning agent
for cleaning the device.
3. Make sure that no water penetrates into the openings. Always rub the
device dry after cleaning it. All components must be dry before they are
used again.
4. Do not use sharp objects, benzene, solvents or cleaning agents that
damage plastics under any circumstances.
5. The air pump does not contain any parts requiring maintenance. Ensure
that the air pump is kept clean. Keep the air inlet (1) and air outlet (4) clean.
6. Keep the device and all its accessories in a location that is protected from
dust, moisture and direct sunlight.
ATTENTION! RISK OF INJURY!
Always disconnect the mains plug from the socket
and allow the device to cool down before cleaning
the device.