Maintenance And Cleaning - Beko DH 7533 RXW Bedienungsanleitung

6

Maintenance and cleaning

Service life of product extends and
frequently experienced problems will be
reduced if it is cleaned at regular intervals.
6.1 Cleaning Lint Filter /
Loading Door Inner Surface
Lint and fiber released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
C
Such fiber and lint are generally
formed during wearing and
washing.
A
Always clean the lint filter and the
inner surfaces of the loading door
after each drying process.
C
You can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
Open the loading door.
Remove the lint filter by pulling it up and
open the lint filter.
Clean lint, fiber, and cotton raveling by hand
or with a soft piece of cloth.
Close the lint filter and place it back into its
housing.
A layer can build up on the filter pores that
can cause clogging of the filter after using
the dryer for a while. Wash the lint filter with
warm water to remove the layer that builds
up on the lint filter surface. Dry the lint filter
completely before reinstalling it.
56 / EN
Clean the entire inner surface of the loading
door and loading door gasket with a soft
damp cloth.
6.2 Cleaning the sensor
There are dampness sensors in the dryer
that detect whether the laundry is dry or not.
To clean the sensors:
Open the loading doorof the dryer.
Allow the machine to cool down if it is still
hot due to the drying process.
Wipe the metal surfaces of the sensor with
a soft cloth, dampened with vinegar and
dry them.
C
Clean metal surfaces of the
sensors 4 times a year.
Dryer / User Manual