QRS -101 Bedienungsanleitung Seite 44

N O T E S I N A C C O R D A N C E W I T H E C - D I R E C T I V E
A N D M E D I C A L D E V I C E D I R E C T I V E ( M D D )
Guidance and manufacturer's declaration – electromagnetic immunity
The equipment is intended for use in the electromagnetic environment specifi ed below. The customer or the user of the equipment
should assure that it is used in such an environment.
Immunity test
Conducted RF,
IEC 61000-4-6
Radiated RF,
IEC 61000-4-3
GB
Recommended separation distances to portable and mobile RF communication equipment
The equipment is intended to be operated in an electromagnetic environment, where radiated RF interference is controlled. The user
can help in avoiding interferences by means of meeting minimum separation distances between portable and mobile RF communication
equipment (transmitters) according to the maximum output power of the communication equipment.
Rated power of the
transmitter (W)
0.01
0.1
1
10
100
6
IEC 60601- test level
3 V
eff
150 kHz to 80 MHz
3 V/m
80 MHz to 2.5 GHz
Separation distance according to the tranmission frequency (m)
150 kHz to 80 MHz
d=1.2√P
0.12
0.38
1.2
3.8
12
Electromagnetic environment –
Compliance level
Portable and mobile RF com-
munications
be used no closer to any part
of the equipment, including
cables, than the recommended
separation
from the equation applicable to the
frequency of the transmitter.
Recommended separation
distance:
3 V d=1.2√P
eff
3 V/m d=1.2√P
for 80 MHz to 800 MHz
d=2.3√P
for 800 MHz to 2.5 GHz
Where P is the maximum output
power rating of the transmitter in
watts according to the transmitter
manufacturer and d is the recom-
mended separation distance in
meters (m).
Interference may occur in the
vicinity of equipment marked with
the following symbol:
80 MHz to 800 MHz
d=1.2√P
0.12
0.38
1.2
3.8
12
guidance
equipment should
distance calculated
800 MHz to 2,5 GHz
d=2.3√P
0.23
0.73
2.3
7.3
23