Video Colour Camera with cable 20m
These operating instructions form an integral part of this product. They contain important information
on installing and using the product. Please keep this in mind, especially when passing this product on
to third parties. For this reason, keep these operating instructions for future reference.
Dear Customer,
Thank you for purchasing this camera. This product meets the requirements of the applicable European
and national directives.
In case of questions, consult our technical information service:
Germany:
Tel. 0180/5 31 21 17 or 09604/40 88 45
Fax 09604/40 88 44
Mon - Fri 8.00 to 18.00
Austria:
Tel. 0 72 42/20 30 60 · Fax 0 72 42/20 30 66
E-mail: support@conrad.at
Mon - Thu 8.00 to 17.00
Switzerland:
Tel. 0848/80 12 88 · Fax 0848/80 12 89
E-Mail: support@conrad.ch
Mon - Fri 8.00 to 12.00, 13.00 to 17.00
Read the following operating instructions carefully before connecting or starting the system. They will not only
make you familiar with the correct handling but will also help you to make full use of all technical possibilities of
the system. Should it become necessary for the system to be technically checked or repaired out Customer
Service as well as our Service Workshop would be glad to be at your service. Therefore we would like to ask
you to keep the original packing in order to protect the system from damage during transport.
Warning! Do not miss to read the following! Guarantee becomes invalid in the event of damage caused
by non-observance of the operating instructions. We accept no responsibility for resulting damage.
Prescribed Use
The range of use of the colour camera comprises the surveillance of objects. The video and audio transmission
to the surveillance monitor happens via cables. The colour camera has been designed to be connected to the
video resp. audio input of a TV receiver or a video cassette recorder. The operation of the colour camera is
approved in connection with the enclosed adapter only. The adaptor max only be connected to a household
power socket of the public mains with 230 Volt/50Hz (10/16A) alternating voltage.
Outdoor operation is only possible when shielded from adverse weather conditions and direct sunlight. The
camera must by no means be exposed to rain or splashing water. The camera has to be continuously in use in
order to prevent by the effect of self-heating condensation water from forming.
The power supply unit must not be used out of doors.
The complete product must not be modified or rebuilt and the housings must not be opened!
Product Description
The colour camera consists of a C-MOS camera module in a metal housing with adjustable camera support.
Video and audio output happens via the cinch connectors of the enclosed adapter cable. A power supply unit
can be connected via the DC socket at the adapter cable.
Features:
•
C-MOS colour camera
•
Easy to start by means of plug-in connectors
•
Outdoor installation possible when shielded from the weather
•
Small size of the camera
•
Easy adjustment of the capturing range of the camera
Instructions on Safety and Dangers
We do not accept liability for damage to property or personal injury caused by improper handling or
non-compliance with the safety instructions. Under these circumstances, any warranty expires.
OPERATING INSTRUCTION
b/n 75 06 07
e-mail: tkb@conrad.de
Fri. 8.00 to 14.00
CE