Technical Specifications - Velleman VTLD100 Bedienungsanleitung

Contact your dealer for spare parts if necessary.
•
12. Battery
A flashing battery indicator [6] indicates that battery power is low and
batteries must be replaced.
1. Switch the device off [10].
2.
Open the battery cover at the back of the meter (see illustration A)
and take out the old batteries.
3.
Insert two new 1.5V AAA batteries (LR03C) in accordance with the
polarity markings inside the battery compartment.
4. Close the battery compartment.
5. If the device is not used for a longer period of time, remove the
batteries to avoid leakage and risk of corrosion.

13. Technical Specifications

range
accuracy
laser
operating temperature
IP rating
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior
notice.
V. 02 – 26/11/2013
WARNING
Malfunction may occur if the power is on when the
•
battery is replaced.
Keep batteries away from children.
•
Do not puncture batteries or throw them in fire as they
•
may explode.
Do not attempt to recharge non-rechargeable batteries
•
(alkaline).
Dispose of batteries in accordance with local regulations.
•
VTLD100
0.05 - 50m (0.16 ft - 164 ft)
± 1.5 mm (± 0.06")
<1 mW class 2
wavelength: 635 nm
0°C - 40°C (32°F - 104°F)
54
2 x 1.5V AAA batteries LR03C (incl.)
115 x 48 x 28 mm
135 g
10 ©Velleman nv