Delivery Scope; Intended Use; Technical Data; Declaration Of Conformity - Bosch GSH 7 VC Professional Originalbetriebsanleitung

10 | English
Symbol Meaning
Movement direction
Reaction direction
Next step of action
Prohibited action
Chiselling
Vario-Lock
Switching On
Switching Off
On/Off switch lock-on
Releasing the On/Off switch
Low speed/impact rate
High speed/impact rate
Tool holder
Apply a light coat of grease to the shank
end of the application tool
Service Indicator
P Rated power input
1
E Impact energy per stroke according to
EPTA-Procedure 05/2009
n Impact rate
S
Restarting Protection
Concrete
Brickwork
Weight according to EPTA-Procedure
01/2003
Protection class
L Sound power level
wA
1 609 92A 031 | (26.9.13)
Symbol Meaning
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty

Delivery Scope

Demolition hammer, auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for chiselling in concrete, brick,
stone and asphalt.

Technical Data

The technical data of the machine are listed in the table on
page 149.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 105 dB(A).
Conformity assessment procedure according to Annex VI.
Equipment category: 10
Notified body:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Technical file (2006/42/EC, 2000/14/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 28.05.2013

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 149.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools