Troubleshooting - Skytec KA-06 Gebrauchsanleitung

WARNING:
Do not turn the volume at max when use
this product at public place just like school,
office etc. After long time using the back
panel will be hot, do not touch it by hand.
Note: This unit is supplied with two wireless
microphones in two different frequencies
which can be used simultaneously.
TROUBLE SHOOTING:
Failure
NO POWER
NO SOUND
ONE SPEAKER WITHOUT SOUND Connection between master & slave unit wrong
MICROPHONE NO SOUND
MICROPHONE HOWL
This appliance should not be put into the domestic garbage at the end of its useful life, but must be
disposed of at a central point for recycling of electric and electronic domestic appliances. This symbol
on appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling used domestic appliances you contribute
an important push to the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Tronios cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
In the EU only for licence free use in NL and PT and
in DK for the hearing impaired, in the UK the
frequency range is not for use as well as in S, BE, FR
and IT. Use in PL and ES with restrictions. For DE
apply for an individual license and contact Federal
Network = BundesNetzAgentur. The enduser must
apply for an assignment in other EU countries due to
several restrictions.
Possible cause
The power line is cut off or not connected
No power on the electric outlet
Wrong input, check input selector (3)
The connect line was broken
The volume knob at lowest
Signal line was broke
The microphone not complete connected
Adjust the microphone volume
Change microphone
The microphone is too close to the speaker
Master volume adjust too big