Product Features; Troubleshooting - Skytec Hi-End Serie Bedienungsanleitung

PRODUCT FEATURES

General
- Professional & sturdy ABS enclosure;
- Enclosure and baffle are molded of tough and durable co-polymer material. This range of
speakers is able to withstand high powered impacts;
- A heavy-duty, perforated metal grill protects the woofer;
- Ergonomically designed balanced handle and lightweight enclosure for easy and
comfortable carrying;
- Attachment points for wall or ceiling mount brackets;
- Integral 35mm pole mount receptacle with securing thumb screw.
About the enclosure
The enclosure and baffle of this range of speakers are made of polypropylene co-polymer. The use of
co-polymer allows features such as stand mounting sockets, handholds, ports and high frequency
horns to be molded directly into the cabinet. Not only do you get contemporary appearance, you also
get lots of functionality.
INPUT PANEL
experiencing the same difficulties or problems as the suspected problem speaker, use the information
below to isolate the problem.
No output
Possible cause
Speaker cables
Intermittent
Possible cause
Poor connections
Constant noise, buzzing and/or humming
Possible cause
Faulty electronic
device in the signal
chain check for noisy sources or electronic components. Check wiring for shielding.
6 - 18
1. Input selector CH-1 for Microphone or Aux (line)
TAKE CARE!! Only switch when speaker is off!
2. Balanced input connector CH-1 (XLR or 6.3mm Jack)
3. Volume control for CH-1
4. Tone control for CH-1
5. Echo control for CH-1
6. Balanced output connector (line out). For connetion a
second active speaker box.
7. Master volume control.
8. Line input CH-2 for audio input source e.g. mixer, CD
player, etc.
9. Volume control for CH-2
10. Tone control for CH-2

TROUBLESHOOTING

One certain method of determining if a speaker is faulty is to
substitute a speaker that is known to work correctly for the
suspected problem speaker. If the "normally correct speaker" is
Action
Reseat all connectors
Inspect cable for damage
Inspect wire or connector for stray strand that may short
Action
While it is possible for a faulty speaker to exhibit intermittent output, it's more
likely that an output cable/connector is the problem.
Reseat all connectors
Action
Any constant noise originates in the amplifier, mixer, signal processing, source
devices, or line-level wiring. Check and correct system grounding as required.