Charging The Battery Pack - JVC AA-V200E Bedienungsanleitung

Charging the Battery Pack

Protrusion
Battery pack
BN-VM200U
6
EN
CHARGE lamp
Battery charger
Power cord
To AC outlet
1
Connect the power cord to the battery charger.
2
Plug the power cord into an AC outlet.
3
Remove the battery pack's protective cap. Attach the
battery pack with its protrusion pointing toward the lamp
side of the battery pack mount on the battery charger.
The CHARGE lamp lights up to indicate charging has
started.
4
When the CHARGE lamp lights off, charging is
finished.
5
Slide the battery in the opposite direction of the arrow
and lift off. Remember to unplug the power cord from the
AC outlet.
NOTE:
Perform charging where the temperature is between 10°C
and 35°C. 20°C to 25°C is the ideal temperature range for
charging. If the environment is too cold, charging may be
incomplete.
Battery pack
BN-VM200U
* When charged at temperatures between 20°C and 25°C.
● When charging battery packs after a long storage period,
charging time will be longer than the time indicated above.
Charging time
Approx. 2 hrs.* when one battery
pack is attached.
Approx. 4 hrs.* when two battery
packs are attached.