red kiwi BASIC Set Bedienungsanleitung Seite 13

Tank capacity
The red kiwi BASIC atomizer is filled with approximately 1.3 ml of
liquid. This allows for about 130 to 160 draws, equivalent to about
13 cigarettes.
S-Line Battery with Power Control Display
The S-Line battery's charge level works like traffic lights: Green =
full, yellow = half-full, red = flat. When the battery is empty, the
status LED flashes red repeatedly and the device switches off itself.
When this happens, change or recharge the battery. To charge the
battery, gently screw it into the round opening in the USB charger
in a clockwise direction. Connect the USB cable either directly to a
USB-Port or a 220 volt USB adapter (sold separately).
USB Charger level indicator
The LED on the charger glows red while charging, and green at the
end of the charging process. As the level of charge rises, the LED
light flashes alternately red and green. When the LED is green, plea-
se unplug the USB charger from the power source and remove the
battery. Your battery is now ready charged for its first use and it
will not be necessary to recharge it before you start up the device.
Conditioning the device
When using it for the first time, or when the unit has not been in
operation for a long period, it needs to be conditioned in order to
produce the full amount of vapour:
1. Wait five minutes after filling the tank.
2. Paff around 5 times, one after another. After a few puffs, a signi-
ficant amount of vapour should be generated. If this is not the case,
repeat the process.