Correct usage guide
Filling of the tank: Please unscrew the base
counterclockwise from the tube and sub-
tract it. Hold the tube in a slight angle, fill
the liquid into the tank and not into the
pipe. Fill the liquid less to mark „FILL" and
not higher. Put the base with the core back
into the tanks and screw it with some clock-
wise turns.
Screw the atomizer into the battery with
a clockwise turn. Please ensure that the
threads are not crossed, as this may damage
them.
The battery of your S-Line is equipped with
transport
protection
against
accidental
discharge, and in the as-delivered condition
is switched off. To turn the transport protec-
tion on or off, press the button three times
within two seconds.
Push on the release button of the battery
and pull up the mouthpiece at the same
time. Steam develops only if you press
down continuously on the release button
while drawing.