Wind Control (Wind Threshold), Rain; (Position Programming The Extension To Time, Only For Pre-Programmed Switching Time) - Selve i-R Marki Send Plus Bedienungsanleitung

Programming
SETTING
WIND CONTROL (wind threshold),
RAIN, FROST, TIME END LIMIT, TIME INTERMEDIATE POSITION,
TIME CANOPY TENSION/TILT
(position programming the extension to time, only for pre-
programmed switching time)
1. You have confirmed the SUN menu level. WIND CONTROL will
appear.
2. Use the +/- button to adjust the wind setting. (The two left-hand
figures on the display show the current wind setting.)
3. Confirm by pressing OK.
4. RAIN appears (only for the i-R Marki WSRF sensor).
5. You can activate/deactivate (ON/OFF) RAIN (rain sensor) via
the +/- button (only for the i-R Marki WSRF sensor). Confirm by
pressing OK. FROST appears.
6. You can activate/deactivate (ON/OFF) FROST (frost sensor) via
the +/- button (only for the i-R Marki WSRF sensor). Confirm by
pressing OK. END LIMIT appears.
69
GB