Werbung
Verfügbare Sprachen
Verfügbare Sprachen
valve and purge system before connecting or
disconnecting.
1.3.
Service
Service your QR and hose assembly every
two years or after 200 dives (whichever
comes first) by an authorised dealer or dis-
tributor. This service will include a general
operational check, replacement of worn parts,
and pressure leak check. The service may
require special tools and training. Therefore,
it is advisable to contact an authorised
SUUNTO dealer or distributor for biennial
service. Do not attempt to do any service that
you are not sure about how to do.
Under severe use the inside o-ring in the
male connector may be damaged. It can quite
easily be replaced with a spare o-ring
(3.80x1.50 90shA). Pry out the old o-ring with
a mini screwdriver. Push the new o-ring into
its groove with a suitable small wooden stick.
Do not damage the o-ring or the sealing sur-
faces!
5
Werbung
