Starting Operation; Working Advice; Maintenance And Service; Maintenance And Cleaning - Bosch Drill 1 600 A00 4ZB Originalbetriebsanleitung

OBJ_BUCH-2328-002.book Page 18 Thursday, January 15, 2015 3:25 PM
18 | English
Mounting application tools (see figure C)
– Pull the locking sleeve 3 forward, push the insert tool to the stop into
the tool holder 2 and release the locking sleeve 3 to lock the insert tool.
Operation

Starting Operation

To save energy, only switch the power tool on when using it.
Reversing the rotational direction
IXO (3 603 JA8 0..) (see figure D1)
– Right rotation: To drill and to drive in screws, slide the rotational di-
rection switch 5 forward to the stop.
– Left rotation: To loosen or unscrew screws, slide the rotational direc-
tion switch 5 to the back.
IXO (3 603 J81 0.., 3 603 J59 1.., 3 603 J59 3..) (see figure D2)
Right Rotation: For drilling and driving in screws, push the rotational di-
rection switch 5 left to the stop.
Left Rotation: For loosening or unscrewing screws, push the rotational
direction switch 5 right to the stop.
Switching On and Off
– To start the machine, press the On/Off switch 6 and keep it pressed.
– To switch off the machine, release the On/Off switch 6.

Working Advice

 Apply the power tool to the screw only when it is switched off. Ro-
tating tool inserts can slip off.

Maintenance and Service

Maintenance and Cleaning

 Keep the drilling adapter clean to ensure good, safe operation.
 Remove the drilling adapter from the screwdriver to clean it. There
is danger of injury when unintentionally actuating the On/Off switch.
1 609 92A 10F | (15.1.15) Bosch Power Tools