Beamz 150.487 Gebrauchsanleitung Seite 5

CH2 RGB general
dimming
CH3 Choose speed
Red LED
CH4 intensity
adjustment
Green LED
CH5 intensity
adjustment
Blue LED
CH6 intensity
adjustment
Red LED
CH7 intensity
adjustment
Green LED
CH8 intensity
adjustment
Blue LED
CH9 intensity
adjustment
Red LED
CH10 intensity
adjustment
Green LED
CH11
intensity
adjustment
Blue LED
CH12 intensity
adjustment
Red LED
CH13 intensity
adjustment
Green LED
CH14
intensity
adjustment
Blue LED
CH15 intensity
adjustment
Operation description of the Stand-Alone mode.
Stand alone mode is with no DMX controller or footswitch attached.
Stand-alone: sound/auto/manual.
Auto mode "AP01-AP12": Has 12 patterns in this mode. Select AP01-AP12 and you can set the speed for each pattern.
Sound mode "Soun": SP03 means RGB on, SP02 means color mixing changing; SP01 means 7-single color changing and
SP00 means RGB changing. Please adjust sensitivity knob when the parbar is working in Sound mode.
Operation description of the Master/Slave operation
Master/slave operation is linking more than 1 LED parbar together.
Master/slave mode: sound/auto/manual, no controller needed.
Set working mode: set one of them as master unit (sound/auto/manual), and set the rest in DMX mode, set DMX address as
A001. When controlling the LED parbar with OBEY3, please set each unit's working mode as OBEY3.
Only works when CH1 is between 000<009
FADER – DIMMER
0～255
PLEASE NOTE NO OUTPUT FROM ANY DMX CHANNELS
UNLESS FADE IS ABOVE ZERO.
No strobe
0～15
Choose strobe / running speed
16-255
PLEASE NOTE FULL ON NON STROBE IS ZERO
0～255 Red LED of the 1st par can intensity 0%～100%.
0～255 Green of the 1st par can LED intensity0%～100%.
0～255 Blue LED of the 1st par can intensity0%～100%.
0～255 Red LED of the 2nd par can intensity0%～100%.
0～255 Green LED of the 2nd par can intensity0%～100%.
0～255 Blue LED of the 2nd par can intensity0%～100%.
0～255 Red LED of the 3rd par can intensity0%～100%.
0～255 Green LED of the 3rd par can intensity0%～100%.
0～255 Blue LED of the 3rd par can intensity0%～100%.
0～255 Red LED of the 4th par can intensity0%～100%.
0～255 Green LED of the 4th par can intensity0%～100%.
0～255 Blue LED of the 4th par can intensity0%～100%.
5