Technical Specifications; Switch-Lock - Ferm EBM1003 Originalbetriebsanleitung

Technical specifications

Voltage:
Frequency:
Power input:
No load speed:
Max. air speed:
Nozzle diameter:
Sound pressure (Lpa):
Sound power (Lwa):
Vibration:
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60335; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Description
The numbers in the text refer to the diagrams on
pages 2-3
Fig. A - C
1. Outlet
2. On/Off Switch
3. Lock-on button
4. Suction port
5. Nozzle
6. Dust bag
7. Carbon brush cap
8. Variable speed wheel
220 - 240 V~
50 Hz
400 W
6000-14000/min
3.0 m /s
3
25 mm
82.1 dB(A) k=2.5 dB(A)
Mounting accessories
95 dB(A) k=2.5 dB(A)
Dust blower function
2.994 m/s k=1.5 m/s
2 2
Fig. A + B
• Attach the nozzle (5) to the outlet (1).
• Turn the nozzle (5) clockwise to lock it in place.
Dust suction function
Fig. A + C
• Attach the nozzle (5) to the suction port (4).
• Attach the dustbag (6) to the outlet (1).
After use, always empty the contents of the dust
bag in a dust bin. Open the zipper to release the
dust from the dust bag.
Operation
The On/Off switch
Fig A.
• S witch the machine on by pressing the On/Off
• R eleasing the On/Off switch (2) will turn the

Switch-lock

Fig. A.
• L ock the On/Off switch by pressing the On/Off
• R elease the switch lock again by pressing the
Adjusting the air speed
Fig. A.
The air speed can be adjusted by the dial wheel
on top of the machine.
• T o increase the air speed turn the variable
• T o decrease the air speed turn the variable
3. OPERATING
Before adding or removing the nozzle
from the machine, first remove the power
plug from the wall socket.
swtich (2).
machine off again.
switch (2) and then pressing the lock-on button
(3).
On/Off switch (2) shortly.
speed wheel (8) up (to higher number)
speed wheel (8) down (to lower number)
7