Garden Equipment Cliplift Magnum Gebrauchsanweisung Seite 5

NEVER WORK UNDER THE RIDING MOWER WITHOUT USING THE SAFETY LEG.
7– Clean the cutter deck or carry out any other work on it.
8– Once you have finished maintenance, remove the safety leg. If necessary, lift the cradle using the jack to
unlock the safety stops.
Hold them up using the safety handles then slowly untighten the jack lowering screw.
Once the equipment is fully lowered, remove the rear wheel strap.
The Cliplift Magnum can be stored vertically using the wall mount. Close the jack lowering screw when
storing it vertically.
Maintenance: Regularly wipe with a soft cloth, and grease the different pivoting points using a general
purpose lubricant.
EN
EN