Garden Equipment Cliplift Magnum Gebrauchsanweisung Seite 2

This danger symbol warns users of the potential dangers linked to the use of Cliplift Magnum.
Users must follow the safety instructions marked with this symbol to ensure safe use and
prevent the risk of serious or mortal injury.
Please read, understand and keep the instructions in this manual before using the Cliplift
Magnum
Cliplift Magnum is a lifting device exclusively designed to facilitate the cleaning and maintenance of riding
mowers weighing up to 500 Kg.
Any use other than that mentioned in these instructions will be the users own responsibility and the
distributor cannot be held liable.
Inspect the equipment before each use. Do not use if anomalies, deformations or cracks are
observed. All repairs must be entrusted to duly authorised, qualified staff.
Description
Pin
Stand
Safety leg with lengthener
TM
CLIPLIFT is distributed by Garden Equipment.
Cradle
Support arch
Safety handle
Lifting jack
Pedal
Access ramp (x2)
Axis ø18
Safety lock (x2)
Wheel x2
(((((((x2)
Spacer (x2)
(x2)
Fastenings:
-Screw M16x170 (x1)
-Screw M16x60 (x1)
-Screw M12x35 (x2)
-Screw M8x30 (x2)
-Screw M8x16 (x2)
-Locknut M16 (x2)
-Flat washer ø16 (x2)
-Locknut M12 (x2)
-Elastic washer ø12 (x2)
-Flat washer ø12 (x2)
-Locknut M8 (x2)
-Elastic washer ø8 (x2)
-Flat washer ø8 (x2)
-Locknut M6 (x2)
EN