Filling With Rinse Aid And Making The Setting - Telefunken Tfgs45Si10A+++ Gebrauchsanweisung

Filling with rinse aid and making the setting

Adequate amount of rinse aid prevents the accumulation of white water drops, lime stains, white
lm stripshaped. It also increases drying performance.
To add rinse aid, remove the rinse aid compartment cap by turning it.1 Fill the rinse aid
compartment with rinse to add rinse aid level indicator becomes dark;2 ret the cap and close
it by turning it in a way that the nails, remove the rinse aid compartment cap by turning it. Will
correspond to one another. By checking the rinse aid level indicator on the detergent dispenser,
you can understand whether or not your machine needs rinse aid. A dark indicator
that there is rinse aid in the compartment, while a light indicator
compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse aid
is the position . 3
When you stop using combined detergents
• Fill the salt and rinse aid compartments.
• Adjust the water hardness setting to the highest position and run an empty-wash.
• Adjust the water hardness level.
• Make the suitable rinse aid setting.
Filling with rinse aid and making the setting
Adequate amount of rinse aid prevents the accumulation of white water drops, lime stains, white
lm stripshaped. It also increases drying performance.
To add rinse aid, remove the rinse aid compartment cap by turning it.1 Fill the rinse aid
compartment with rinse to add rinse aid level indicator becomes dark;2 ret the cap and close
it by turning it in a way that the nails, remove the rinse aid compartment cap by turning it. Will
correspond to one another. By checking the rinse aid level indicator on the detergent dispenser,
you can understand whether or not your machine needs rinse aid. A dark indicator
that there is rinse aid in the compartment, while a light indicator
compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse aid
is the
position . 3
1
You need to increase the degree of the adjuster if water stains form on your dishes after a
wash, whereas you need to decrease the degree if a blue stain is left when wiped by hand.
3
Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse
aid residues left as a result of overowing will create extremely high amounts of foam and thus
reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag.
a shows that you need to ll the
a shows that you need to ll the
3
2
EN-18
b means
b means