ResMed Air10 Gebrauchsanleitung Seite 3

English
Thank you for choosing a ResMed oximeter adapter. The oximeter adapter
connects a NONIN Xpod
saturation and pulse rate) is recorded on the SD card inserted into the device.
The Air10 oximeter adapter shown in illustration A is compatible with
AirSense 10 / AirCurve
™
is compatible with S9 devices.
Read the entire guide before using the oximeter adapter.
Air10 oximeter adapter
Refer to illustration A:
1. Adapter connector
2. Release button
3. Oximeter port.
AirSense 10 / AirCurve 10
Refer to illustration C:
1. SD Card cover
2. Air filter cover
3. Adapter cover
4. Adapter port.
oximeter to your device. Oximetry data (oxygen
™
10 devices. The oximeter adapter shown in illustration B
™
S9 oximeter adapter
Refer to illustration B:
1. Oximeter port
2. Release buttons
3. Adapter clip
4. Adapter connector.
S9
Refer to illustration D:
1. DC power inlet
2. Adapter clip socket
3. Adapter port
4. SD card slot
5. Alarm (Bilevel alarmed
devices only).
English 1