Inputs And Outputs; Functions Of The Buttons - Keep Out Xgm27Pro2Kv2 Benutzerhandbuch

Unauthorised disassembly of this device may result in electric shock or fire. In case of unusual smell or noise from
this device, be sure to disconnect the power adaptor and contact authorized service personnel.
When this device is idle for a long time, be sure to turn off the power. Otherwise, electric shock or fire may occur.
Follow local ordinances for disposal of the product.

INPUTS AND OUTPUTS

HDMI 1 input
If your PC has HDMI video output, connect the supplied HDMI cable between the HDMI 1 input of the monitor and
the HDMI output of the PC. This input is HDMI version 2.0.
HDMI 2 input
If your PC has HDMI video output, connect the supplied HDMI cable between the HDMI 2 input of the monitor and
the HDMI output of the PC. This input is HDMI version 2.0.
DisplayPort 1 input
If your PC has a DP video output, purchase a DP cable and connect it between the DP 1 input of the monitor and the
DP output of the PC. This input is DP version 1.4.
DisplayPort 2 input
If your PC has a DP video output, purchase a DP cable and connect it between the DP 2 input of the monitor and the
DP output of the PC. This input is DP version 1.4.
DC input
Connect the supplied power supply cable to the DC input of the Monitor and plug the adaptor into a household
electrical outlet. 12V/4A power supply.
3.5mm jack output
Plug a headphone into the 3.5mm jack output of the monitor to listen to audio directly from this output.

FUNCTIONS OF THE BUTTONS

MENU button: The OSD menu is displayed on the screen. Once inside it also has the function to accept or access the
interior functions.
UP button: The UP button allows you to move between menus and change values.
DOWN button: The down button allows you to move between menus and change values.
EXIT button: Exits the current menu or exits the OSD menu.
POWER button: If you want to turn on the monitor press the on/off button, if you want to turn off the monitor
press it again.
Note: To access the monitor options you must have a source connected to one of the monitor inputs.