Product Functions - Vevor F52-C Benutzerhandbuch

trimmer, pole saw and pole hedge trimmer according to the intended
operation with desired tool attachment.
Brush cutter: with the cutter blade attached, the product is intended to
cut heavier weeds, brush and similar vegetation.
Grass trimmer: with the trimming head attached, the product is intended
to cut smaller types of weed, lawn grass or similar soft vegetation.
The product should not be used to cut unusually thick grass or vegetation,
wet grass or to shred leaves etc.
Pole saw: with the saw chain / guide bar assembly attached, the product is
intended for cutting limbs with a thickness of max. 200 mm.
It must not be used for cutting other materials, such as plastic, stone,
metal or wood that contains foreign objects. It may only be used with the
guide bar/saw chain combination stated in these instructions. It is not
permitted to use other types or sizes.
Pole hedge trimmer: with the hedge trimmer blade, the product is
intended for cutting and trimming of high and wide hedges, bushes and
shrubs in domestic gardens. The maximum cutting capacity must be
observed. Do not cut branches exceeding the stated maximum capacity.
The use of this product in case of rain or humid environment is
prohibited.
For safety reasons it is essential to read the entire instruction manual
before first operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other than
those described.

Product functions

Primer
The primer (A7) is positioned underneath the air filter case (A8). Use the
primer for cold start (Fig. 27).
43