Error Codes; General Warnings - Puffco Link Bedienungsanleitung

Troubleshooting

Error Codes

Low Battery (
Battery is too low. Fully charge your device for best results.
No Chamber (
No chamber is detected. Remove and reinsert chamber.
Chamber Error (
Remove and clean chamber before reinserting.
Chamber error could also be caused by outdated firmware.
Confirm your firmware is up to date.
Device Overheating (
Allow device to cool before using.
Be sure to store your device in a temperature-controlled area.

General Warnings

If Link won't connect:
Make sure your Peak Pro firmware is up to date.
Clean and insert chamber securely.
Ensure your chamber is completely dry before connecting.
If airflow feels restricted:
Clean Joystick Cap and chamber
Check for residue buildup.
If no vapor is produced:
Reseat the chamber.
Ensure heat profile is active.
09
)
)
)
for 5 seconds)