"Open"
Plastic roller
Cleaning the printer
The outside surfaces of the printer can be wiped clean
using a damp cloth. Do not clean any cleaning agents
which could attack the plastic housing. All inner surfaces
should be kept dry.
Putting in a new paper roll
- Open the paper compartment by pressing the "Open"
button.
- Open cover.
- Remove plastic roller.
- Insert new paper roll (shiny side up).
- Pull the paper out approx. 150 mm.
(there is a sticker at the start of the roll which would
damage the printing head).
- Click the cover closed.
Note
Paper can be changed while printing. The testo 575 printer
stops printing once the end of the paper roll has been rea-
ched. The printer remains switched on. Data will not be
deleted. Printing will continue once the new paper roll has
been inserted and the paper compartment cover is closed
(function is only available with testo 175/177
data loggers).
11. Maintenance
21