Lamp Replacement; Technical Data - Heitronic Hoja Installations- Und Betriebs-Anleitung


Check again that the connection is correct.

Switch on the circuit breaker of the house installation again.

. Lamp replacement


Always replace lamps in good time before the end of their service life to avoid damage to persons, the
luminaire or other objects.

Disconnect the product from the power supply and allow it to cool down before replacing the lamp.

After previous operation, allow the lamp to cool down first.

Use only lamps approved for the luminaire. Information on approved lamps can be found on the type plate.

Before using the luminaire, check that the lamp is properly seated in the lampholder.
. Malfunctions
Luminaire does not switch on / Sockets without function

Light switched on at the switch?

Check the connected lines

. Technical data

colour
Article
anthracite
35279
white
501428
. Care

First disconnect the entire product from the power supply and allow it to cool down before carrying out any
cleaning or maintenance work on the product.

Clean the product regularly - only with a slightly damp, soft and lint-free cloth.
. Disposal

Waste electronic equipment must be taken to public collection points and must not be disposed of as
household waste.
LDBS Lichtdienst GmbH, Chemnitzer Straße 8, 14612 Falkensee, www.HEITRONIC.de
Connection Lamp
230 V ~, 50 Hz E27, max 6 W LED
230 V ~, 50 Hz E27, max 6 W LED
Protection Protection
Type Class
IP 54 I
IP 54 I
4 / 8 1/23