Operating Instructions; Before Use; Using The Appliance; Operation And Use - Wmf Stelio 3200000855 Bedienungsanleitung

Operating instructions

Milk frother
Components
1. Lid
2. Sealing ring
3. WMF milk froth DISC
4. Jug
5. Start/stop button with control lamp
6. Appliance base with cable wrap

Before use

Please read the instruction manual carefully and keep it for future reference. The manual contains
important information regarding the operation, cleaning, and care of the appliance.
Store the user manual in a safe place and pass it on to any future users along with the appliance.
The appliance must only be used for its intended purpose and in accordance with the instruction
manual. Always observe the safety instructions when using the appliance.
Improper use can result in damage. No liability will be accepted for any damage resulting from failure
to follow the instructions in the manual. Please observe the warranty information.
Before assembly and first use, remove all protective films and any existing stickers completely. No
packaging residue should remain on or inside the appliance. Clean all parts that come into contact
with food and all removable parts as described in the "Cleaning and Care" section.
Check the appliance and accessories for completeness and damage. Do not operate the appliance if
parts are missing or damaged. Instead, contact customer service. You can find the relevant contact
details in the warranty information.
10
WMF milk froth DISC
The WMF milk froth DISC (3) can be removed from the appliance for easy cleaning. To do this, gently
push down the WMF milk froth DISC (3) and slide it to one side.
To assemble the appliance, proceed as follows:
Simply slide the WMF milk froth DISC (3) sideways into the appliance, an internal magnet holds the
DISC firmly in place.

Using the appliance

Before using for the first time, ensure the appliance is thoroughly cleaned, as detailed in the "cleaning
and care" section.
Any surplus cable can be wound into the bottom of the base unit (6). Connect the mains plug to an
earthed socket.

Operation and use

1. Add the required amount of milk to the jug (4) and close it with the lid (1).
2. Place the jug (4) on the base (6).
Warning:
Always place the lid (1) securely on the jug before switching it on.
Never remove the lid (1) while the appliance is running.
Note:
Preparation can be stopped at any time by lifting the jug (4) off the base (6).
Allow the appliance to cool down before reuse.
The quality and volume of the milk froth depends on the milk used (e.g. the fat and protein content,
temperature, etc.).
11