Nobile R1S Betriebsanweisung Seite 4

Montage-/ Betriebsanleitung
Mounting-/Operation Instruction
Mounting instruction:

Connect the LED driver to the mains voltage, note the labeling (L, N, GND)

For dimmable Version Dali and 1-10V, you have to connect the control line. Follow the instruction on the driver.

Now put the driver in the ceiling or choose a different installation mode to fix the Panel.

Connect the Panel with the jack plug-system.

Put the LED Panel in the ceiling. Consider the max. Ceiling load.

If you use some accessories consider their own mounting instruction.

If you have purchased a panel without LED driver, you must operate the panel with the correct current. This is luminaire-related and must be read off the luminaire
product label.

Without separate accessories, the LED panel is a pure insertion light.
1
4
LED Panel R1S / R2S / R3S 38W
7
Technische und gestalterische Änderungen im Zuge stetiger Produktentwicklungen vorbehalten.
Technical and design changes due to product developments are subject to change without prior notice.
nobilé AG – Wächtersbacher Str. 78 - 60386 Frankfurt/M. Germany - www.nobile.de
2
5
8
rev. 0.1 – 08.11.2021
Seite 4 von 4
3
6