strapex STR 69 Bedienungsanleitung Seite 12

Strapex STR 69
5.2 TURNING OF SEALER UNIT
Removal
– Disconnect sealer from air supply.
– Remove six cylinder screws (4/1).
– Take off cover (4/2) with gasket.
– Remove lock nut (4/3).
Cauton: When removing lock nut (4/3)
the piston with the the spring remains un-
der pressure. For this reason it is advisable
during removing of lock nut, to press the
piston down and to release it slowly.
– Remove two lock washers (4/7) and remove cylin-
der screws (4/5) and covers (4/4).
– Draw out the sealer unit (4/6) and turn it 90
Installation
– Install the parts in reverse order.
12
.
0
7
Fig. 4
3
6
1
2
4
5
0
90
05.11