INVENTOR INVHM82A Bedienungsanleitung Seite 11

Reversing the Door Swing
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting to the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally
tightening the top hinge.
8. Insert the hinge bracket and screw it to the top of the unit.
9. Use a spanner to tighten it if necessary.
10. Replace the hinge cover and the screw cover.
Downloaded from www.Manualslib.com manuals search engine
8
180°