EMPHASER EM-MBR1 Montage- Und Betriebsanleitung Seite 5

2
Place the panel on a clean, soft surface. The original speaker is plugged in at three points on
the panel. If necessary, use a plastic wedge to lever out the speaker.
3
Place the new EMPHASER speaker on the door panel. Push all three mounting balls into the
mounting holes one by one until they are firmly locked.
8
Connect the "OUTPUT" connection cable of the supplied crossover to the EMPHASER
loudspeaker. The cable labeled "INPUT" is to be connected to the vehicle speaker cable
that originally powered the original speaker.
Mount the door trim in reverse order.
9