SwitchBot Lock Ultra Benutzerhandbuch Seite 8

Press and hold the fasteners for better adhesion, then flip them downward. Check that
you can lock and unlock your door normally.
Step 5: Attach the Magnet
Note:
If the magnet is positioned 0 to 30 millimeters from your
•
Lock Ultra, install it with the 0–30 millimeters side facing
the lock.
If the distance is 30 to 50 millimeters, install the magnet
•
with the 30–50 millimeters side facing the lock.
Step 6: Add Your Lock Ultra to Our App and Calibrate It as Instructed
Install the Main Pack. Once your Lock Ultra is powered on, the LED indicator light
•
on the front will slowly flash blue, indicating the device is in pairing mode.
Remove the insulation tab on the Backup Pack.
•
Open our app, tap the "+" icon located at the top right corner of the home page,
•
and select Add Device. Find the Lock Ultra icon and select it. Then, follow the on-
screen instructions to add your Lock Ultra and complete the calibration
procedure.
mm
mm mm
8
mm