Clearing Faults - Parker Servicejunior Test Kit Betriebsanleitung

Clearing Faults

In the case of large-volume measuring set-ups or hydraulic fluid has been refilled
after venting the test object, hydraulic fluid can escape at the safety valve.
► Pay attention to the test kit when releasing the pressure!
► Release the pressure carefully!
► Pay attention to the fill level in the supply tank!
► Collect any hydraulic fluid which escapes and dispose of it according to
the applicable laws!
1 Hold the test kit so that no hydraulic fluid is at the cap of the supply tank.
2 Turn the pressure release valve 2 revolutions counterclockwise and wait until the
measuring set-up is depressurised.
3 The components can be disassembled from the test kit.
6. Clearing Faults
ATTENTION!
Risk of material damage through improperly completed repair work.
► Never open the test kit!
► Never attempt to complete repair work yourself!
► If the test kit is defective, return the test kit to the manufacturer!
You can clear the following faults yourself:
20
V2.0/07/20