Installation; System Requirements - Wacom DTU-2231 Schnellstartanleitung

SYSTEM REQUIREMENTS

• PC. Windows 7, Vista
CD-ROM drive.
• Macintosh. OS X, v10.4.1 or greater. DVI or VGA connector, available USB port, CD-ROM drive.
ADC connectors require ADC to DVI adapter, not included.
The interactive pen display supports digital (DVI) and analog (VGA) video signals. If updating your
video card, first complete the video card installation and verify the video card is operating correctly.
Connecting the pen display to a DVI card generally results in optimum performance.
Notes:
You may be able to set up the pen display as a mirrored, extended, or independent display.
When using more than one monitor, the pen display will map to the monitors based upon how
your system is configured. By default, if you are in mirror mode, the pen display will map to
the entire space on each monitor. See your hardware and operating system documentation
for details on configuring your system for use with multiple monitors.
A Display Toggle function is available for use with multiple monitor systems. This enables you
to toggle the screen cursor between the pen display and your other monitors.
The pen display can be used alone or with another display. You may connect a second
device, such as a monitor or LCD projector, to the DVI-I
second device will mirror the image on the pen display. Complete the pen display installation
before connecting another device to the unit.
There are two primary steps to the installation process:
• First install as a display.
• Then install as a pen tablet.
Carefully follow ALL instructions. Both steps require hardware and software installations and
adjustments.
Important: You MUST install the Wacom driver software for correct pen-on-screen functionality.
2
English

INSTALLATION

, XP (32 and 64 bit). DVI or VGA connector, available USB port,
™
port. When using this port, the
OUT