Connect To Power - Bluesound Powernode 2 Kurzanleitung

CONNECT FOR SOUND
A Connect one end of the speaker wires (not included)
to the terminals on the back of the POWERNODE
B Connect the other end of the speaker wires to each
corresponding speaker. Make sure the "+" (red)
terminal and "-" (black) terminal are connected
to the corresponding "+" and "-" terminals of the
loudspeaker. Use extra care to ensure that no strag
wires or strands cross between posts or terminals at
either end.
A subwoofer con also be connected directly to the
POWERNODE 2. Subwoofer cable not included.
2.
CONNECT TO POWER
A Select the AC Power Cord appropriate for gour
region and plug it into the Plauer, and then into
your wall outlet.
B The POWERNODE 2's LED button should turn
Green, indicating that the Player is in Hotspot Mode
and readu to be added to gour home WiFi network.
Never force a power cord into a woll outlet.
An adaptor may be necessary in certain regions.
Solid
_5