Werbung
Note: The Manual Search is automatically terminated if no entry occurs during a 30 seconds period.
Note:
1. Point the IR transmitter of the original remote control to face the IR receiver of the keyboard
remote with approximately 30mm between them. Hold the two remotes in a straight line to make
the learning process more accurate.
2. When you cannot choose any more buttons on the new universal remote control for learning, it
means the memory is full.
D. Display the code
1
Press and hold the device button ( TV) and simultaneously press button 1 to display the thousands
of the 4-digit code. Count how often the LED flashes, if the LED does not flash, the number is zero.
2
Press and hold the device button (TV), simultaneously press button 2 to display the hundreds of
the 4-digit code, Count how often the LED flashes, if the LED does not flash, the number is zero.
3
Press and hold the device button (TV), simultaneously press button 3 to display the tens of the
4-digit code, Count how often the LED flashes, if the LED does not flash, the number is zero.
4
Press and hold the device button (TV), simultaneously press button 4 to display the ones of the
4-digit code, Count how often the LED flashes.
For example for Code 0169
1. Press TV and 1 LED flashes zero times
2. Press TV and 2 LED flashes one time
3. Press TV and 3 LED flashes six times
4. Press TV and 4 LED flashes nine times
F. Reset / Delete Function
Simply press the device (TV) button and Button 0 together, when the LED flashes three times, all
settings will be deleted, and the remote goes back to factory default settings.
GigaBlue Support
Beim Giesshaus 7
DE 25348 Glückstadt
www.gigablue.de
sales@gigalue.de
Tel. +49 4124 937262
Fax. +49 4124 937266
Werbung
