Werbung
pairing, once pairing is successful, the LED will extinguish. If it's failed, the keyboard will sleep after
20S.
Notes:
1. Chargeable lithium battery, The LED on keyboard side will flash one time per second, when the
power is lower than 3.3V, please charge up with USB cable.
2. When the remote is charged up, the LED on keyboard side will flash still the power of battery is full.
3. The keyboard will sleep once no operation within 60s, please press any button into working state.
4. When you press "lock" button during operation, the keyboard side will not work and green LED will
be lighted, it will work once you press "lock" button again.
Keyboard layout
a. Caps button
Pressing Caps button one time, all letters will generate capital letter, press it again, it will be
normal.
b. Shift button
Pressing Shift button one time, the keys with a blue label will generate the code for blue
key.
Before using the remote control, you need to carry out one of the following steps first:
Set up for TV universal remote (for remote side)
A. Set up by Brand Code
1. Switch on the device for which you wish to use the remote control
(e.g. TV set).
2. Find the code number of your device brand in the code list (e.g. Lifetec 0050) from the relevant
device group (TV).
3. Press and hold the device button (e.g. TV) for three seconds. Release the device button as soon as
LED lights up, now it is in set up mode.
4. Enter the 4-digit device code (e.g. 0050 for Lifetec TV) within 10 seconds. If an entry is not made
Werbung
